Quoting
Can you quote a repair from a site photo?
Use a site photo to identify a repair, check a printed dimension and recognise the details that still need an owner’s site inspection.

What can the picture settle?
A photo of damaged plaster can show that a patch meets a cornice. It can also show a tall cupboard directly below the work. Those details affect preparation and access. A close-up taken from the doorway gives you little basis for quoting a working height or deciding whether the board has dried.
Use a site photo to identify the affected area and choose the next question. Price a repair once the facts that set your scope and rate have been checked. An image of a printed dimension may let software read the label. A perspective photo of a patch needs additional references before it can support a physical measurement. It still cannot establish the condition behind the plaster.
Separate what you see from what someone tells you
In the Marrickville example Alex says “about forty by sixty centimetres, looking up from the floor”. Write down the words “about” and “from the floor”. They explain how much weight to put on the numbers. The plumber fixed a pipe yesterday, according to Alex. The edges still feel damp. Alex has photos available. Until those photos actually arrive, the job has a caller report and an offer of evidence.
- 40 × 60 cm
- Approximate dimensions supplied by Alex from floor level.
- Ceiling height
- Unknown. Ground-floor access describes the route into the room.
- Damp edges
- Reported by the caller. The plasterer needs to assess the repair before pricing.
- Painting
- Excluded at Alex’s request. Confirm the finish expected at handover.
Ask for an overview from the floor and a close-up if the customer already has one. A joiner may need to see which way a door opens as well as the edge that binds. A landscaper can use an overview to locate a sunken strip of paving, then confirm depth and access on site. Label each image with the location and who supplied it. Keep any dimensions reported by the customer beside the image, with their source.
When OCR belongs in a quoting workflow
Optical character recognition reads marks such as “600 mm” from a drawing or label. A useful tool shows the proposed text alongside the original crop, the sheet number, revision and what the dimension applies to. If 600 sits between two extension lines around a doorway, it is poor evidence for the width of a nearby patch. A high recognition score doesn’t correct a bad crop.
Tesseract’s own documentation describes common trouble with skew, uneven lighting and image resolution. Keep the original and try a straighter crop or a clearer sheet before relying on a reading. To measure a distance on a scaled drawing, establish the drawing’s scale independently and check the region you are measuring. Bluebeam’s guide shows how to calibrate a page against a known length. Tesseract image-quality guide · Bluebeam page calibration.
In our local OCR check, 17 of 26 pre-labelled fields matched across 20 drawing regions. Nine were missed or read differently. Only three fields qualified for a numeric proposal under our review rules, all from one clean drawing. The other fields still needed someone to read the sheet. These were drawing crops, so this test establishes no measurement accuracy for a phone photo of a room. Follow the printed-dimension check.
Give the owner a decision they can sign off
For a dry patch at a confirmed accessible height, an owner might review a repair line and a separate travel charge. For Alex’s damp ceiling, the useful output is a callback about an inspection. Keeping the price field empty saves a difficult conversation if the owner later discovers more work underneath. An assistant can still prepare the facts, exclusions and questions the plasterer will take to site.
Once the owner can price the work, set out the agreed scope, exclusions, amount, validity period and how the customer accepts. Keep the accepted version available if the customer asks for paint or travel changes later. The Australian Government’s quote guide covers the information customers need in a written offer. Business.gov.au guide to preparing quotes.